Installed WRONG! Missing Suspension Bolt! Unnoticed for MONTHS!

Ray...! Did you get a new toy?

Surely you don't need allll the bolts in the suspension... Lol

You had more than one zerk that wasn't taking grease. I hope you replaced them off camera.

Typical Toyota fj owners

Wife Unit didn't make her mandatory appearance. You need to dock her pay.

DON'T ever hit your head or you shin on a trailer hitch

box of assorted grease fittings is cheap, gives you a selection of threads, diameters and also ones with an angle to allow greasing. cheap, and well worth buying as the box is about the cost of 10 fittings, and if one is popular you just buy a pack of 50 of them.

thx Ray

I kept shouting at the screen, "Drift pins!"
But that's my reflex from working on heavy machinery.

"Don't ever hit your head on a trailer hitch."
- YOU CAN"T TELL ME WHAT TO DO! (clunk) Ouch.

Didn't fancy cutting of the excess on that bolt? Nah!

trailer hitches or for hitting shins not heads

The UK and the North guys are finally getting through Ray is greasing brakes! he is doing it wrong but its a start LOL xx

great upload,thank you Ray.have a good week end,👌👍

So the bigger question is does the arm have to be removed to greased? Everytime?

Regardless of certain comments by others,I would still most definitely want this guy to service my vehicle,no question.

in the rust belt it is nice to have zerks! most cars now don’t have them. planed failure for parts.

hello here is a comment to hopefully help the channels I'm subscribed to and doing my one job

Seems like a good time to buy some grease zerks!

Was this part of the lift kit?

The gas tank strap on my '10 FJ rusted away and dropped my tank down....caught it in time.....

Get a real grease gun and throw away the toy gun

I'm dumbfounded they were driving around with nothing much holding the axle from fore and aft movement or torqueing when accelerating or braking. Crazy.

These comments got me laughing. Some people 😂

Hey mate, you know that you can buy bump hats that look like everyday hats, but have a hard shell inside to protect your noggen from bumps whilst under the car.

You can usually push the little ball down on the end of the grease nipple to free it up, if it's stuck.

I was working on a Ford EcoSport (yuk) recently...it has a specially designed hood latch so that you can repeatedly bang your head on it!!! Nice. Please cut off the end of that bolt you used...make it tidy like!

What about the other one that didn't take any grease?
And using the Ratchet end of a wrench with an impact? Ugh

I Like your Videos.
You are honest!!!
Nobody Else would say i missed this Problem ( Last time the car was here) !!!
Respekt from german viewer!!!
Mach weiter so 👏
Bist ein Guter Mann!!!!

Thanks for the video !

I seem to have more saved bolts and nuts at home than Ray's shop !

Who tf was greasing the caliper bleeder?

Good job, BROTHER!🫡🇺🇲

Ray, you are getting way out there with your techniques.

"bass-ackwards"! Love it, I don't think I've heard that for DECADES.

Ratchet strap

Why didn’t you put an angle grease sert on there?

I dont know if you have that greese gun on high speed or high pressure, but for stubborn ones I put it on the slow speed high pressure and just run the crap out of it and try to exercise the joint.

Change the grease nipples, if nothing is going in than the passage is blocked, nipple or grease hole.

Why was the left rear caliper bleed screw greased?

You should have a Wera ratchet/hammer with an alignment pin. I sent one to the shop for you months ago because everything is a hammer. 😂😂

well thats a catch worth taking to dealer for warranty new parts damn. Love your attention to detail. If i lived anywhere near you i'd be paying you to do my stuff instead of doing it in my driveway. Pretty sure you completely destroyed the threads on that bolt tho ....

Surprised a hole wasn't worn through gas tank

Always a hack job! Just get the right god damn bolt! If your going to rig shit than don’t charge your customers! They are paying you to fix it properly!