Тэги:
#Tips_lntelligent #chisel #How_to_sharpen_a_chisel_as_sharp_as_a_razor #Sharp_razor #Razor-Sharp_Knife_Sharpening #knife_sharpening #Sharpen_a_knife_to_razor_sharp #how_to_sharpen_a_knife #razor #sharp #how_to_grind_chisels #chisel_grinding #chisel_sharpening_easily #chisel_grinding_method #chisel_grinding_technique #Wood_chisel_grinding_technique #grinding_wood_chisels #scoop #sharpen_a_chiselКомментарии:
If you haven't got the skillset to sharpen a chisel properly, you properly won't have the skill to use one either.
ОтветитьA chisel will sharpen up like a razor blade, if you know what you are doing. 😂😂😂
Ответитьvery sharp,
wow.
GETTING a chisel as sharp as a razor is one thing and there are many ways to achieve this (every male woodworker has a series of rectangular bald patches on his arm from testing razor sharp chisels). Whether one can maintain this sharpness depends on the quality of steel. This is good but there are already so many videos on achieving "scary" sharp edges and many viewers will be disappointed because they cannot achieve the same results on cheap chisels. What is needed are videos on SELECTING good chisels to begin with.
When you buy cheap chisels, you'll never be short of something with which to prise open tins of paint. Research brands or buy old antique edge tools (even quality modern tool companies cannot afford to invest in the time to make their own steel these days). The sharpest chisels and plane irons I have were made around 1900 or earlier. They all get sharpened and honed the same way... but they're not all MADE the same way.
Id like to see how you would manage to sharpen gouges and different shaped chisels too
ОтветитьWhat the heck.
Proper chippies are rolling in their graves.
It's all in the wrist baby. Go manual or go home.
Keren kaka ❤❤❤
Ответить😢ใช้เครื่องมือช่วย
ไร้ฝีมือ,ย้านเราลับสิ่ว
คมและตั้งฉากแป๊ะ
เพราะเคยชิน😮😮
Seriously? Using a hack saw on wood??
ОтветитьOk, where did you get those stones
ОтветитьThank You For Bringing Back The Memory Of My Dad Spitting On A Round Stone & Sharpening His Chisels On It 60 Years Ago.
ОтветитьUse real tools not home made trash
ОтветитьThe chisel is very sharp. 🤘
ОтветитьGreat! Thank you.
ОтветитьHow amazing.super duper Horning gig.will do one.thanjs
ОтветитьHere in Russia, the working edge of the chisel is sharpened not at 90 degrees relative to the body of the chisel, but slightly obliquely.
ОтветитьHow do you keep from clogging the stone with the wood ?
ОтветитьSame idea cept I use 600 3M wet sandpaper and honing oil! Works great when you put a full sheet of paper on a piece of glass.
ОтветитьHard to trust any "tips" from a source who hacksaws through a piece of wood like that.
Ответить2 honing stones? So fancy! I expected a rock, you know, from the same cave you found those other tools.
ОтветитьReal way: few touches of the belt sander (dont blacken the tip) then run it over a fine stone, get a leather strop if you want to go sharper. Forget this jig. Using chizels since i was 12 and im 35 now. Thousands of doors fitted, thosands of joints made.
ОтветитьFirst run it over a grinder wheel hollow out the bevel. Then buy a cheap chisel sharpener holder/roller. The square the edge and roll it until you have a good edge with a hollow on the blade.
ОтветитьFor all the guy commenting…a hacksaw!?…different countries use different saws. That saw was the appropriate profile and tpi count to cut that wood that way.
ОтветитьThis avoids the silly wobbly gigs as well. Gret stuff.
ОтветитьTOTAL BULL-HIT!!
ОтветитьYeah, the wood is completely unnecessary
ОтветитьThe chisel sharpening technique is so perfect, it's worth learning from your sharing
ОтветитьHollow grinding allows multiple follow-up honings before regrinding. This method means you are laboriously regrinding the entire face every time the chisel gets dull.
How do you measure sharpness anyway ?? 🤷♂
Pretty silly since every chisel has a different angle ,… I real don’t believe you’re going to make one for every chisel you own unless that’s the only chisel you own….🤣🤣🤣🤣🤣🤣🤣
ОтветитьUse a roller jig .. it’s what it’s made for …!
Some like to do things the most difficult way possible …🤣🤣🤣🤣🤣🤣
Hadir nyimak bos ❤❤❤❤
ОтветитьIlmu yg bagus suka ya 👍🙏❤ salam perkenalan moga sehat selalu ya om 🙏🙏
Ответитьhow is angle to sharp a chisel ???? 30 ????????????????????????????///
ОтветитьDarling !!! come up with and show something as simple as this, but to use an electric sharpening tool.
Ответитьзачем точить стамеску если она острая как бритва??хаха
Ответить👍👍👍❤❤❤
ОтветитьДяди размером с шкап в своем козмосе размером с очко затачвают сверла , стамески .козманавты анальные.
ОтветитьGenijalno....
Ответитьএক ইঞ্চি বাটালও।দেড় ইঞ্চি প্রাইস কত কোন দেশি প্রোডাক্ট মেসেঞ্জারে ছবি দিয়ে পাঠাবেন সাথে প্রাইজ জানাবেন আছে কিনা তাও জানাবেন
ОтветитьWell done! Very simple device to sharpen a cutting tool .
ОтветитьBosch Chisel..🤗😃
ОтветитьAwesome! Your chisel sharpening trick is very impressive and useful.
ОтветитьGreat. Thank you!
Ответитьreally clever jig
ОтветитьHi
ОтветитьWow super
ОтветитьHai...?.I Indonesia ❤
ОтветитьI think the wood is going to get worn more than steel skewing the angle i.e. grinding the back-end of the bevel no?
Ответить