Voopoo Drag X ~ Drag 3 leaking fix

Here is a permanent fix- dont buy Drag.

I hope you will be more successful, useful for other people, aamiin. Keep working 👍

كم اسعر

Tried everything including different tanks it always leaks, long story short it's a design fault.

Perfect, fucking thank you. I was def thinking i wouldnt find the exact tank/vape

I saw in Argus pro, the main reason for the leaking liquid is its coil design, If you check bottom side of coil there is a small tiny rubber belt, and when you take puff at the moment uf the coil get too hot the rubber is burning utself and losing the protection. It's not getting tight anymore because of heat its already got damage.

I try replace the coil but all coils are same, Argus Pro is the most worst kit ever because of draining liquid. 😢

Is there any other coil that can set in argus pro? I'd try this if it can help to solve my problem. I've already bought anoth kit from Drag, but still Im worried if there is a way then it might help other

The coil design was wrong. If you check the bottom of the coil, there is a tiny rubber? This thing gets damaged if you take a puff more than 1sec the coil got too hot and damages that rubber. 😢

Those yaks are rubbish

The worst vape mode in the Market not only leaking tank the battery don’t hold power more then hour don’t purchase this product

I don't fill mine anywhere near that much and it leaks.

Does not work at all, sadly

I fill mine about 2/3 and they still leak sooner or later...sometime it takes a week sometimes 2 or 3 but they all will leak eventually

Gimana caranya saya pesan liquid dari luar bosq🙏🏻🙏🏻👍🏻👍🏻

I'm planning to buy this h80s but the leaking issue is holding me. I have a leak-proof boost b100 which is very ideal.

My argus not working smoke, other all things working. But not came smoke. can u help me to get back fine

ปแทามนคตขช

fix your camera bro

its so f anoying i wanna trow that damn thing to a wall

It definitely worked 🎉

Thank you

You have to fill it all the way up but it’s not gonna stop leaking it doesn’t matter how many times you fill it up it doesn’t matter how cool you keep it because of that magnetic coil is going to keep leaking stop using drag

Interesting, I have the same issues with my SMOK RPM5 someone gave me and I really enjoy as a great alternative to smoking cigarettes
I'm guessing I lose about 25% of the vape juice I put in and I only fill to 20% max

I just thought the leaking was why I was given the RPM5 in the first place and figured I'd just take the opportunity to upgrade & get a Vaporesso Luxe II as I've already saved north of NZD1500 in just 2 months and I no longer have any craving for a cigarette

Having had a quick look round, I'm reading the occasional review mentioning leaking occurring on many if not all refillable vape devices, even the top end NZD200 ones like the Luxe II

I'm a professional electronics engineer and while this video is very well done and informative, I don't think we're really seeing the root cause being fixed
The leaking isn't that big a deal, vape juice is fairly cheap compared to cigarettes, it's just the mess & sticky fingers

How bout to fix atomizer short? Any suggestion?

Thank you sir - it worked for me, - at least for now!

They should all be recalled and pay compensation! Bad design, do not buy!

The design is so flawed never again will I buy any Voodoo products ever again

Disagree with you the drag 3 its not wright its garbage!

I have problem with THIS . CHECK ATOMIZER

I didn't think about that... You are correct. Thanks for telling me something I should have known. Too hot and where is the heat gonna go?

Not working its leaking

For some reason my drag s kit is tasting burnt even though I replaced the coil? What’s the reason for this?

I have a Voopoo Argus Pro. I read the manual as a habit before I use any device or appliance. Part of the instruction says never fully fill it up as it will leak. Filling it up to two thirds was recommended.

Even my Geekvape and Oxva devices recommend never to fill them up fully.

And yes, I take off the pods after use. If it has a removable battery I also remove them when not in use, and I also charge them externally.

I have no problems with my vape devices no matter the brand or size and make by following these simple tips.

IGNORE ALL THE OTHER SUGGESTED LEAK FIXES. LEAKS ARE CAUSED BY USING THE WRONG TYPE COILS FOR THE E-LIQUID TYPE YOU ARE USING.
For the Voopoo. If you are using standard VM1 OR VM3 coils with the wrong VG rated liquid. It will leak VERY BADLY.
Voopoo are supplied with VM1 coils as standard.
If the liquid is too thin. It will leak through the cotton. VM1and VM3 coils are only suitable for high VG liquids. Most NIC salts are low VG liquids.
Only VM5 and VM6 coils are suitable for NIC salts or freebase 50/50 liquids.
Alternative coils are as follows:-
TW series coils= High wattage vaping for NIC salts or 50/50 Freebase liquids. (TYPICALLY 40 WATT)
TM or TR series coils= low wattage vaping for NIC salts or 50/50 freebase liquids. (TYPICALLY 18 WATT)
THIS IS THE ONLY FIX FOR LEAKING ISSUES. IGNORE ANYTHING ELSE.

VM and TW series coils are for direct to lung Vaping.
TM/TR coils are for mouth to lung vaping.

I was using nic salt liquid with my Voopoo and it leaked badly for weeks.
I changed the coil from a PNP-VM1 to a PNP-TM2 coil.
No more leaks, not even a drop.
I use my Voopoo at 15 watts.
PNP-VM1 coils are only suitable for high VG liquids.

thanks for the tip

I don't get this with new coils, i guess its from the cotton getting over soaked, i do half tank and i always let the coils cool down at least 15min after the last use before refill

Why flavour go up inside mouth?

❤👍🏼

Had the same leaking dragx. Problem solved now. Make sure you are the right filter. All different sizes. If you've kept your little booklet that came with your vape,it tells you what size you need. It actually does make a difference. I know through almost giving up. Tryed everything till the penny dropped.

i will try this thanks!

its the O-ring on the coil expanding that causes the leak, regardless if you fill 10% or 100%, 4 years vaping with voopoo vapes , every one does the same

Arkadaşlar bana hediye geldi. Kullanmıyorum. İsteyen olursa uygun fiyata satarım.

In addition to the filling advice, I've found that on the DRAG device, using an 80W coil makes the device too hot, thereby enabling the oil to leak easily. However, using a 40W coil solves the problem for oil leak as it does not generate as much heat, and also produces better quality smoke.

Good ❤❤❤

Nothing fixes leaking tanks. Period. They're all disposable shit.

The leaking happens because the juice flows too easily through the cotton, into the coil and down the airholes. That's all.

BS! It leaks all the time!

In order to keep the liquid in the tank, the tank must be closed hermetically, otherwise the lack of pressure difference inside of the tank will make that the whole idea of keeping liquid inside of the tank won't work properly, the coil wouldn't be attached enough to the tank and will let the liquid to leak out. The silicon tongue will wear down eventually or perhaps even broke. It's just very bad design of the tank, it seems engineers of Voopoo didn't think much about it. And when silicone tongue is broken you just can through the tank onto garbage.

better solution is to wrap some cotton at the bottom of the coil

7 minutes of my life I can never get back