i5 6600k Manual Voltage Settings Stable OC @4.6ghz 1.345V

Is it ok when leave it at AUTO ?

I don't even hear the motorcycle or anything it's far more annoying hearing you whine about it and fill the screen with rage faces

4.6Ghz @1.275V :)

Thanks a lot :) Used same settings as yours and it works perfectly. Temps never passed 60C btw im only using CM Hyper 212 Evo with Jetflo 120 fans Push/Pull config.

aida64 seems to be a very weak stress test compared to things like prime 95 or intel burn test for anyone trying to verify their over clocks stability

im running fine 4.6Ghz @ 1.3v v. Praise ive got good 6600k chip, :)

1.4 volts is fine for 22 nm, or 32. But it's kinda pushing it with skylake

im running my 6600k to 4.5ghz @1.265v

Now run Prime95 and check them temps.

mine is workin fine i got a score of 712 cb on cinebench but i checked my memory and its stuck at 1333.4??? need help please.

Strange how mine 5 year old 32nm 2500k hits 4.6Ghz with 1.330v

If I pick 1.35V, it'll still go up to 1.39-1.40V when I'm stress testing the CPU (it's on 4.5Ghz). Doesn't really seem like the manual limitation affects it, it just changes on it's own when it thinks it needs more voltage.

+Tek Overclocked i can't write more then 3.9 in my bios, i don't understand y? :/

Thanks mate! Now I have my i5 6600k in maximus viii hero and corsair h100i v2 working at 4.6ghz without any problems! :D
max temperature 55C

sorry, but why when i put 46 in CPU core ratio, but it put 39?

just started over clocking today after 1yr on stock, same Z170 Pro and 6600k, mine is on 4.6 at 1.280v and can boot up to 5.0ghz on 1.450v, I have 3 case fans and a 120mm AIO cooler. quite happy, I'm getting 25-33% boost

Which level of Load Line Calibration? tell me pls :)

my i5 6600k @4.2ghz - 1.185v

Could you do a stability test with Prime95? Prime 95 tests the system harder from what I've seen and I would love to see if you get a difference. Thank you!

Silicon lotery won here ! OC @4.6Ghz 1.265V !

And 67°C full charge on AIDA64 , Cooler Master V8 v.2

4.5Ghz 1.28vcore.. is that ok..?? ( i have test it and i haven't any crash.! )

Can someome help me?

Here are my specs Intel Core i5-6600k SkyLake 3.5GHz LGA 1151 with a Custom red Corsair H60 watercooler,MSI GTX 1060 6GB Gaming X Overclocked,16gb of ram,1 tb hdd with a toshiba 120gb ssd,ASUS Z170I Gaming itx motherboard,Corsair 750 Watt PSU semi modular.Also has 5 fans

The guy I got the CPU from I think already had the CPU overclocked to 3.8 ghz but I was wondering if I could go any higher? The gpu i got used also came overclocked but I accidentally updated the drivers so I downloaded afterburner and reclocked it.

Sharing uneducated advice online...

Did you change the loadline calibration?

6700k @ 4.6 Ghz , 1.28v
100% stable:-)

You have no idea what you're doing

i don't have the ai timer overclockinh thing help mee

2500k @4,7 1.32V (Good cooling) is this good? (it is stable) Can this Damage my cpu?

Your voltage is way to high!!! This cpu doesn't like such a high voltage at all and beside that 1.3 is more then enough to get a stable overvlock @ 4,5. Mine is stable @ 4,6 at 1.275v.

Any pc gurus still here?
What do you guys think would be the max overclock setup I can reach with my I5-6600k cooled with Cryorig H7?
Motherboard: Gigabyte Z170X Gaming 7
VC: MSI 1050ti
RAM: Corsair Vengeance 2666mhz
PSU: FSP Hyper 600w

For me it got worse 2 ghz instad of my old 3

only works on z motherboard?? i have a Asus h110 i think be change the xmp and frecuency but only work and z motherboard.

Can I try this with my 8700k?

That's some a grade novice over lock video

Sorry man you're annoying

It s better to choce adaptive voltage trust me. In this way your cpu doesn’t work every second at a fixed voltage.

2019 and I'm trying your setup, thanks!

2019 got mine stable at 4.6ghz with vcore at 1.250v. When stress testing with aida64 extreme for 10 min, the voltage went from 1.250v to 1.280v max no less no more and very stable for my I5 6600K 4.6Ghz. When idle it's stays between 1.248v to 1.264v. I'm very happy with my chip. Was also stable at 4.8ghz with 1.350v. When stress testing it went from1.350v to max 1.425/6v, but i didn't like seeing my chip requiring over 1.400v so 4.6ghz is enough for 24/7 use for me. I think i got the golden chip here :D. Mobo i'm using right now is Asrock Fatality Gaming I7 loving it! oh as for cooling I used MSI Frozer cooler, temp when testing max 64/65 Celsius(in 4.6ghz but in 4.8ghz temp max at 75/77 Celsius) :D.

why such high voltage? i hit 4.6ghz at 1.280v

i press ctrl alt delete again again again again again....... till i see the press delete button screen to load bois, then i go to exit and load default, then i disable csm because i have a M.2 with my OS on it. then window and pc works again. Reseted my cmos too before the ctrl alt deleted thing, not sure it helped, but this last trick always got me back in bois long enough to fix it.

another problem i was doing was, after crashing i load bois make changes , then save and exit, but some kind of windows warning screen is there when loading up. At first i was enter bois again and changing stuff again, thinking i did something wrong again. But i all, all i had to do was make changes in bois and if i seen a windows warning screen when loading up again, hit the reset button, so windows can reset the new settings i guess.

fast overclock, i got 4.3Ghz @ 1.375 70C, might try tuning it for 4.4Ghz

Your windows got damage because the settings are for stock so windows is not recognizing such a higher clocks

How do you get 2666MHz on this motherboard?

I cant overclock my 15 6600k on my asrock h110m motherboard. Is there any other ways to overclock it?

thx man

Hi there. You know how to fix the voltage stability of an i9-10900k. It is that it marks 1.352, 0.979, 0.788, 1.270, and 0.684. Is that normal or is there something wrong and why is it? Greetings.

i have i5-6700K and i bluescreend and got stutters ingames when 4.6 but those fixed when i set it to 4.4

Yes, 4.4 is the best overclock.
Above is crash in multiplayer games.
Also do not overclock manuel. Automatic is the best way and you have never a crash.

Congratulations on making a good video