OpenWRT - Install OpenWRT 21.02 on Ubiquiti EdgeRouter X

Bạn có thể hướng dẫn cấu hình DAWN để tự động kick sóng 2.4Ghz sang 5Ghz được không?

Finally a Video on how to do this! Thank you!!!

can you please make a tutorial how to flash Astoria networks ARV7510PW22 on openwrt

Why isn't there a SWITCH in the interfaces section? great job greetings

i wish any of ubiwuity devices supposted pfsnse or opnsense too

Will this work with the ERX SFP model? I don't make use of the SFP port at home though, it was all they had in stock at my supplier.

Hey can you please make a guide on Batman mesh on openwrt.

Could you do a tutorial on rtty zhaojh329 for remote access to routers with Openwrt

Could you make a tutorial of the rtty tool for remote access to routers with Openwrt

How do you get the name of the router in the top left corner in the openwrt homepage?

Life saver!

Help 🙏🏻 sofware openwrt Mikrotik RB951Ui🙏🏻🙏🏻

The EdgeRouter X seems to have been discontinued by Ubiquiti. Is there something similar in terms of hardware specs and price that is compatible with OpenWRT?

I need video installation openwrt on Mikrotik WapR 2nd please..

Can you do a openwrt flash on a edge router 4?

Why SQM is not working on openwrt 12. Version

Great job sir and thnk u for sharing. I do hav this device but still running under 19.07.8. I would like to upgrade but first learn how to config the new release with the same switch / vlan aspect the previous one. Would you help us and set up mwan3 and remote access as well. This is a great device imho. Thnk u again.

GREAT VIDEO! thankyou

I hate that ISPs are STILL using PPPoE connections for network auth... My fiber provider does this. I've always used DOCSIS my entire life and registering the MAC of the cable modem was always the easiest... running PPPoE on a special vLAN is such a pain... but I do like that with fiber, I can route the line direct into my UDM-PRO and setup the VLAN and PPPoE connections there and discard all the ISP equipment. This is the only plus to using PPPoE... but limitations for hardware offloading and other things with PPPoE kills bandwidth when you get past 600Mbps where I run 1gig symmetrical

Thank you for doing this. I have a couple ERLITE/ER4 that I pulled from client locations and can breath new life into these little powerful routers and keep as hot spares for my customers to swap out in an emergency to get them up and running while I get a new replacement of their equipment. OpenWRT is a great project. Using PPPoE is always a hassle to setup on new interfaces and this is a huge help to show how easy it was to setup in OpenWRT.

Thanks for the video. I flashed the temporary image as explained on the video, but I use a Mac and can't use winscp. Cyberduck doesn't work because apparently the small temporary version doesn't accept the command SCP ( because it uses dropbear which doesn't support it). Is there anyway I can move the final image to the router on a Mac?

Thank you for showing this.
Is it possible to use radius 802.1x auth. on open wrt eth0? My GF lives in a student resident and her old rasperry pi wlan router (I dont have the credentials) is dying so I want to have a backup plan.

Thanks alot for your guide on this because I made a mistake and installed openwrt snap shot without gui and I didn't know how to upgraded from there so thanks

Thank you again, I convert my Edgerouter X with openwrt by following this video

Thanks for this. Hardware offloading is still broken on the ER-X 8 years later. It didn't matter much in my case years ago, but now the router is a severe bottleneck for my internet speed. I just installed OpenWrt and if offloading doesn't break IPv6 I can get another year or more out of this router.

You are awesome. Thanks for It!

Thanks for this friend! I was having issues and seeing your sysupgrade file had a version number helped me realize I was using the wrong file.

Followed this successfully, thank you. I have PoE and would not have been able to debug without your video 🚀

Valeu! Deus te abençoe. Amém

I happend to find OpenWrt very buggy, not stable on about 3 devices. Also, there are lots of videos on how to install it, how about doing real things, or upload CLI commands on how to do anything

Great how to video. Thank you for making this!

404- not found when downloading the firmware?

Is there any other way I can get the firmware?

Thanks for this great guide. I was able to get OpenWRT installed in 20 minutes. The only problem I have now is that if I go to update packages, it fails. If I click on System > Software > Update lists it says it failed to download and to check my network settings. But it's working fine and I can access internet with it. So I'm not sure what is wrong there. But thanks a lot for your video.

THX!!!!

Bom dia meu ilustre
Já olhei teus vídeos muitas vezes e consegui fazer o procedimento e ficou muito bom

Mas não veio com o QoS no meu sistema
Consegui me ajudar?

Hello, thank you for your guide. after sysupgrade -F open... step, i take the error "remote side..." and after this the edgerouter cant identify the eth , i connect my pc to eth1 or 2 its starting identifying but after couple of seconds the led of eth1 turns off, and after couple of seconds on again and trying identify and the contiouns all the time. can you help me please with this? i do everything step by step from your guide.

😢😢I didn't understand the turial well, and can you tell me if the sqm is working normally?

Como faço para voltar para o firmware orignal do edgerouter?

how can i revert to original sofware

😢Make a video reversing openwrt on the edge router please!!!

Question i have the ER4 but i dont use ppoe or vlan just whats normal... Do i still need to do all these steps?

Can you do an easy tutorial on how to get openwrt to ER4.... From my understanding the process is a little different than this.

is there a procedure do reverse to the original firmware ? Did you try ? if so, can you share ? Tks in advance

What would be the benefits of this change in hardware?

Salve, parabéns pelo vídeo, amigo vale apena colocar o Openwrt no EdgeRouter X ? Terei algum ganho para games online?

Why did HTOP show 4 cores? I thought the ER-X is a dual core 880MHz.

for what is good open wrt for ? is better as original os ?

How to back to ubnt firmware from openwrt?

can you just download and upload the file straight to the erx to skip the transfer process?

Mình cài lên edge router x sfp xong cài lộn file sysupgrade nó k lên nữa,
giờ có cách nào cài lại không bác