2018 Mazda 6 Skyactiv 2.5L 4 Cyl Transmission Fluid Change and Filter

Same process for the 2.2 diesel skyactive?

I (for my car(s) do/did multiple drain and fills with 20 miles in between vs dropping the pan, then 1 drain/fill every 2-3 years.

I’ve seen many instructional videos as good as this one but I’ve never seen better! Really well done guys.

Why didn't you clean old RTV from the engine side? Do you have any leaks?

How much transmission fluid does the manufacture recommend for that vehicle?

any reason why you use the Moly brand instead of the mazda fz fluid?

Bro, you saved my life

This is why I l like gear box tranny easy to change fluid. Cvt transmission it’s complicated and no room for error. Otherwise it’s going to cost you grip if mess up this procedure.

Whats with mazdadealership and service centers refusing to do this service and saying it will cause the transmission to slip?

I've kept up with my maintenance besides that, but i really fear they are lying to me about the trans.

do you have to take out the whole pan or can you just do a drain and fill just the fluid?

I see some people checking the dip stick while the car is on. Is that necessary?

Cuántos km tiene para el cambio de ATF

Good video,it's good for 2015 mazda 6 automatic transmision?

How I can see the temperature?

Hi, i have this situation, Mazda 6 , 2014 automatic, i drive 60 km/h , i stop accelerating and then i push the gas pedal again, doing this i feel a play between transmision and wheels and also a noise' clunk' .
Is this normal?

Is liquidmolly reliable like OEM

Woah the best video so far🫡

If without the filter how many liters do you need

the manual says to measure atf level while the engine running

Mazda 6 2017 with 150k miles is good to do the change or not?

得点着火查看变速箱油位

The best part about this is, you did it off the ground with no hoist. Just like 99% of people watchig this. Great tutorial mate. 👌

To properly check the transmission fluid level, the car needs to be running and warm.

Thanks a lot for this very good tutorial
Justo one question, around how many litters of oil did You use?

I got a question i got a 2015 mazda 6 transmission with 141000 miles. My transmission is still working fine never done a transmission change on the vehicle. Is it to late to do a transmission oil change with fiter change. Is it worth it.

Everything was superb. Only thing I saw wrong was using a nipple to refill the fluid. What made you use the RTV gasket maker over buying a filter with a rubber gasket? Seems like you are creating work for yourself when you change it next time.

How many miles did you have at this time?

Hi , great job
Same procedures with manual transmission too?

I am 140 k km on my milage, never changed, should I change now or just wait until it breaks?

Good video but I would make sure Liquid Moly is suitable for a Mazda CX5. I just did mine and I'm using Mazda tranny oil. More expensive for sure but at least I can sleep at night.

Thanks for this. In order to not mess platking lot with oil, I will take out witn oil pump as much I can, then rest of it drain

Hi, what about the old oil remaining in convertizor it is a problem?

Heeeeelp! My friend, what choices do I have for the automatic transmission oil for a Mazda 3 2018 ?

ابو حميد كيف هالزيت معك

Didn't remove the crusty remains of gasket off the trans housing, just stuck the new over the remains of old. If you're going to post a demo.... at least do the job correctly.

Great video thanks :)

I just bought a new pan for this job they're really cheap.
Also you should have cleaned the old rtv off the transmission. I bet you that pan is going to leak. Lastly there is no compatible fluids for this transmission other than the OEM Mazda FZ fluid plus if you use something else you're mixing fluids as only about half the transmissions full capacity is drained this way.

Very structured and easy to follow.

What was the oil liqui moly....

Why not Mazda oem FZ atf? With as dirty as that engine bay is i hope they change fluids and filters alot.

To properly check fluid level: fluid temp. 122 degrees Fahrenheit engine running. The stick will read considerably higher without the engine running. When the engine is running it's pumping fluid up into the transmission and torque converter lowering the level in the pan. The stick is marked for a running engine. The fluid temp. Is also vital. The temp. changes the fluid vescosity. Temperature makes a huge difference when checking levels. Mazda transmissions are good but you must follow specs. This fill is likely low. Follow the service manual!

Where did you put the floor jack at under the car???????

I didn't see you remove the old pan gasket and apply new.

If you have an issue with Mazda transmition: First try to program/update your transmition : Start the engine then after 30 seconds press on the breaks little hard. Then N then Switch off then M1 for 5 seconds and just press start, then N start the car then M2 for for 5 seconds then M1 ….wait till you see tachometer going up & wait till it goes down. It worked like magic no clicking sounds especially with reverse.

Gret job - and kudos for using the correct RTV (ATF compatible)

l would have cleaned off the old RTV from the transmission housing as well. It would suck if the pan would start to leak after all that effort.

Also, I buy the original ATF FZ from Ravenol. The Liqui Moly stuff isn't exactly specified for the Skyactiv FW6 transmission.

So how do you guys feel about the supposed "lifetime" transmission fluid Mazda talks about since this is a Skyactiv model?

Also why are you torque tightening the transmission oil drain pan when its not pressurized?

How many oil bottle for mazda 3 2.5L 2018?
In the manual says 7.8 L what about it?

Not supposed to check level of fluid while running?