DeWalt DWE7491-XE 254mm (10”) Table saw -Tool Review

love my Dewalt table saw Had it for 2 years now and with all the jigs I've made to go with it, it's ideal for my jewelry box making

what about the mitre guide ? they say its super loose slopy and useles ? is it true ?

Did you buy it without the wheeled stand? Because I don't really need the stand, but I cannot find it without the stand. I'm assuming the stand is a bit over $100 itself...I'd like to save the money if I can. I plan to use it in a set up similar to yours.

Can you fit dado blades to this machine as I’m thinking of getting it 😎🇦🇺

Thanks for the review mate, am looking at buying my first table saw. Is this model a 10amp plug or 15amp? Thanks again 👍

Just picked up one of these today. The table saw I normally use at the local Menz Shed is unavailable, and it looks like we are going to be closed probably for the rest of this year, unless they develop a vaccine for the covid virus before then. I've not had much chance to use it yet, but one thing I noticed is that the anti-kickback claw device was not gripping on hardwood because the paint had effectively rounded off the points. Ten minutes with a smooth file fixed that, and it now grabs the hardest piece of wood I could try it with, and it was not letting go! The only thing not impressing me so far is that the T-slots are way over the .75" I thought they were supposed to be. They measure between 0.766" and 0.768" so they acceptably parallel. The DeWalt mitre gauge is spot on 0.75", so with ­≈0.016" of play the mitre gauge is too sloppy for reliable use. Although, when pushed against one side, and carefully setting the mitre gauge to 90° by eye, by best framing square showed excellent alignment with the blade. One of the first things I'll be doing is making a cross cut sled, so the loose t-slots shouldn't have been a big issue, but I had to lengths of oak that I made extra from the last sled I made, and they are going to be too loose to use.

Has the blade nut every come loose while in use for you?

Warum jika