Single-Stage Urethane Paints on My Classic Car from Eastwood

has anyone used this paint ? how good is it ?

@67dodgepolara Cool, my brother has a replica K.I.T.T. car and it seriously needs a new paint job (the guy who shot it must have used rattle cans, or didn't know ANYTHING about paint. I've never shot a car before, but I'd do my homework before I did anything.

i use kirker paint. its a poyurethane paint. works really well, and its not too expensive.

nice commercial

Yes. Single stage (especially single stage urethane) makes a good base.

A Link to visit Eastwood and buy paint is below the video.

This video is mislabeled. The system demonstrated is a two-stage system (base coat and then clear coat).

These products are single-stage urethanes that do not need to be clear coated, but can be. Some of the metallics like the Malibu Sunset and Gasser Green, we recommend the clear coat being added due to the coarse metallic flakes in the finish. We do now offer many of these colors in base coat/clear coat formula (these came out after this video was made).

how does this compare to "base coat - clear coat" system?

Do you recommend the 2K Ceramic Chassis Black & Epoxy Primer Kit for inner fender walls and firewall or is there another strong product ?

Thanks for the good video. I'm painting a 34 Ford Coupe in the Eastwood Urethane (primer, base and with a final clear coat) "Bonneville Black Cherry Pearl". Nice stuff but as far as safety goes, when handling and spraying with Urethane it's best to use a Positive Air Flow respirator. The filter mask with charcoal filter shown in the video isn't effective enough. It's best to be safer than sorry. Painters need to understand health risks involved spraying polyurethane paints, checkout Isocyanide

How much urethane and activator is recommend for painting a 2002 Dodge Durango?

How is this a "single stage" if he used clear.. It's not single stage it's base coat/clear coat 2-stage ...

single stage w clear coat? WTF?

Hi , do you have the original color for a Jaguar XJS 95 in high gloss red ?
Then I mean one stage paint .

Probably bad, maybe dangerous, info on the charcol canisters for the respirator.  You cannot seal them up after a few hours use then get a few more hours out of them some days later.  The organics that you want protection from diffuse through the activated charcol pack and when you try for the second use they exit the back of the pack and enter your lungs.  Check with the respirator manufacturer.

single stage does not need a clear coat

how do you polish single stage metallic without a clear coat?

Deveria ter uma opção para traduzir

single stage can be clear coated.he didn't say you Had to clear it...it's tough as hell if clear it..

Since some people fail to read regular print I am going to type the rest of this in all caps.
THE BEST SINGLE STAGE PAINT IS ACRYLIC ENAMEL, PERIOD.

All paints can be sanded before clear

Hi ! Need Help ASAP ! I mixed 4:1 instead of 5:1 of a single stage PPG DURETHANE DTM 95-3300 Series (no need for reducer), what would be the consequence if i painted that mix on a 3 hours cured epoxy primer ? They were my car calipers... Should i restart all over (sandblasting....) since they are all dismounted ? Any thought ?

Good video! I was wondering if two colors could be mixed to make a custom color?

When you put clear over it,it is NOT a "single stage" ..wtf?

all the info they gave you is important,the most vitally important is the respirator,these paints will kill you,if you use the hardners,they are killers when mixed with acrylic enamel or urethanes,actually after painting many cars and bikes the hues are the only difference,protect your lungs,shoot your vehicle get OUT of the paint area and look at it later,there's not a damn thing to fix anything after shooting,wait till fumes are gone,warned

11 year old video loaded with facts still relevant.

Lol I remember a girl tried to key my car with this paint and she failed. So much so she tried to say she didn’t try after seeing her red handed.

i missed any informative imformation-what happened?

More facts are needed. Weak video. Tell us EXACTLY what the pot life is, working time, how long to cure, when to apply 2nd coat, is 2nd coat needed, - so much left out its frustrating. This is a sales pitch, not a tutorial or demo.

What is the safest paint for DYI? If I have to use propane heaters for heat in my shop this winter, are waterborne paints a feasible option?

EASTWOODS EPOXY PRIMER SUCKS! THEIR SAND PAPER SUCKS! THEIR TOOLS BARELY WORK! PLACE SUCKS! STAY AWAY FROM EASTWOOD PRODUCTS, YOU'LL THANK ME LATER!

Urethane is the way to go...no doubt. Painted my 2013 RAM coupe with mettallic gunmetal grey urethane. Wow!

Clear coat applied on top of single stage urethane???

If you are clear coating it as well, it is no longer a single stage paint.

From the way he describes the manufacturer, I'm wondering if it's Imron 🤔