How To Flush Your Water Cooled PC

Cool.. im just gonna throw my PC out the window 🪟

Hahahahaha fuck yeah that was a dark analogy lmao great vid too I was freaking about about draining my system for the first time. It's a breeze after the second time around. Thanks for the video man, great stuff lol

Absolutely love the editing where you had started filling it with distilled water before removing the little annoying tip/plug thing from the filling bottle. 😂
Just used the exact same bottle an hour ago to fill and clean out a new rad, and had the same issue. 🙌🏾

Btw. Am about to build my first loop today. Would it make sense to do this a couple of times with distilled water in the new build? Flush it through. I already cleaned out the rad.

A much easier way is to use soft tubing for the run into your pump and attach that to a gallon of distilled water. Place the tube that returned the water to the pump, the one you just replaced with the soft tubing from the gallon of distilled water. into the sink. Turn the pump on. This will power flush the system without introducing air. Use as many gallons of distilled water to flush the system as you want then reconnect all the old tubing and throw some cryofuel concentrate/color in to finish the job. Easy and fast.

I’ve seen babies in the hosp that were born have no hole in their wee wee would you blame God?

Just clean the distroplate and the gpu and cpu plte

Not me building a water cooled system without a drain plug

So don't use dyes in the water..got it

How long does it take to fully complete this chore? Does the clear coolant need to be flushed every 6 months too? I'm not sure if I could actually be an owner of a high performance water-cooled PC! :D

What drain valve fitting is that?

God loves yall and Jesus Christ is returning soon

Amazingly helpful. Thank you!

Recently watched this video! It was helpful. Although, I am running into a problem where my CPU is now overheating and my PC shuts itself off. It has never done anything like that before and only happened after I flushed out my PC. Maybe my coolant isn't very efficient at keeping my PC cool?

Why the extra 5 steps? He could of skipped so many steps to achieve the same result

Damn that analogy is so dark

2 years later my man built a water cooled pc with no drain valve 😅 Don’t throw it out the window. It’s badass ❤

what a bull shit

Do you need to use keep using distilled water to flush it out? Can't you just use tap water and then on the last flush, use distilled a few times?

Thanks! I know what to now for draining my brand new custom water-cooling system!

Tfw i have no soft tubing to drain

What drain valve is this!?

open the filler cap when emptying the system? difficult it is

Love how you do a highly expensive build. If you are making a video on how to change coolant and drain, that maybe you should do a more common model. Shuts dumb

I didn’t add a drain valve to mine. Doing the sucky sucky isn’t fun…

Doing all of this once per 12 months ? Wow….what a burden

thank you for answering my question within 3 minutes of video starting. My computer has been thrown out the window as instructed.

Good video - fun tip, if you have a spare power supply, just connect the jumper and the pump to it. saves having to disconnect the 24pin, EPS and PCI-e cables.

The people with pc’s don’t watch and people who don’t have pc’s watched this 😎

i'm going to build my first loop, many thanks for highly adivicing to add a drain valve. But I'll go for the " toss through the window " solution ! :D

And this is why liquid cooling is bullshit.

You are just putting in new coolant of the same colour, is it necessary to do a flush? Can I just drain and replace?

have u ever wonder what will happen if you put car coolant inside water cooled pc?

naah man, too much work and maintenance! stickin to air cooling lol

The baby dies?😂😂😂😂

This is pain in the ass

Question about using the jumper: I am doing a leak test. I have unplugged the cpu and gpu cables. When I flip the switch to power on I still have my fans and some of the rgb on the case powering on with the pump, is this still okay?

Well done video I am using an AIO but thinking of moving to liquid cooling since so am getting a new graphics card I can cool as well. I am just trying to decide on soft or hard tubing and if I want a TT pump or distribution plate. Is there anyone who makes cheaper fittings than ThermalTake?

The drain valve thing is the exact reason my gaming PC has just sat in the attic for years. All I've wanted to do is smash it. Whoever built my pc did a very good job except that one thing, like why?

Thank you so much the video! Really appreciate the step by step. My boy and I are new to water loops. Almost turned on the power supply with the GPU and Mother board still connected as we tried the initial fill of the reservoir. Hope to one day make it to one of your setup wars. Thanks again!

Ah yes the dead baby, you don't want that :D
Same liquid EK-CryoFuel for 5 years, just adding more every now and then, working just fine :)
Pump is like 20 years old, working fine too
Best investment ever

Got a custom PC with water cooling. The cunts gave me no pee hole.

just wondering can I add colour to deionised water?

Great video. You made sure not to get anyone shocked.

goes a lot of destilled water..

Man, the shop that I payed a lot of money to build my PC, from parts that I selected, didn't configure the cooling loop with a low point drain plug or a high point opening to help with flushing. Sadly my pump died after a year of regular use and now I'm struggling to drain the loop.

How are you going to know when it's cleaned out if you already have clear coolant?

If using distilled water, there needs to be chemical added to prevent algae growth.