How to Recover Data from a RAW Hard Drive 3 Methods

In this video tutorial, we will discover 3 ways to recover data from a RAW hard drive. 🛠️ How to recover data from a RAW partition: https://bit.ly/3Q0gia7

Timestamps:
00:16 What is RAW hard drive?
01:05 Quick tip to save your data
01:30 Method #1: Recover data from RAW drive
04:04 Method #2: Recover RAW partition
04:42 Method #3: Format your RAW hard drive
06:15 Conclusions

In today's topic, I'm going to be giving you some different solutions that you can use to recover data from a RAW hard drive or recover files from a RAW partition on your Windows computer.

Before you do anything, you should stop using the drive and refrain from using it as much as possible to avoid further corruption and overriding of the files on the drive.
So that'll just give you the best chance of recovering as much stuff as possible. So that's a quick tip for you right there. Yeah. I would highly advise that you watch this tutorial all the way through, at least watch this first method before you give anything else a chance and that'll again, be the safest for your drive overall.

Method #1
Let's just jump right into the first method of recovery here, which is going to be using file recovery software to pull the data off the drive, even though it's raw now, while technically the fastest way to gain access to your drive and to actually make it usable again is to format the drive. We don't recommend this because it comes with the obvious drawback of erasing your data. So the software we're going to be using today is called Disk Drill. And it's one of the best in the industry, comes standard with all the tools you need to not just recover your files, but backup and further protect them as well.
Steps to recover data from a RAW drive:
1. Download, install, and launch Disk Drill for Windows.
2. Select the RAW storage device on which the deleted files were stored and click "Search for lost data".
3. Use the file format filters on the left to narrow down the scan results until you find the file you’re looking for. Select it to see its preview on the right.
4. Click the checkbox next to the file and click the blue Recover button at the bottom.
5. Specify the recovery folder and click OK.
https://www.cleverfiles.com/howto/raw-drive-recovery.html#how_to_recover_files_from_a_raw_drive

Method #2
Well, there are a few things that you can try. And the next thing I would try is actually another piece of software called Test Disk. This is free open-source software that while it is simple, shows a lot of promise in this area, specifically inside the software, you have the ability to scan a drive and correct corrupted blocks rebuild a boot sector, and even undelete files. It also allows you to recover data from a RAW drive or perform RAW partition recovery. I have made a video about it before I've also written about it.
How to recover data from a RAW partition:
https://www.cleverfiles.com/howto/raw-drive-recovery.html
https://www.cleverfiles.com/howto/testdisk-review.html


Method #3
Okay. Now, if all else fails, you still can't get the stubborn thing to return and you can't get your files off, then it's time to look at formatting. This method is suitable both for recovering data from an internal drive and for recovering files from a raw external hard drive. So you've probably heard of formatting before, and yes, it's true. It completely resets the drive and thus deletes all of the data on it, restoring it to its factory state. Essentially. However, one important distinction that I want to make is that when you format a drive, you have the option to select a quick format. And what that means is that it's still going to reset the drive and reset the file system and delete everything. But the data is technically still there. So you would still be able to run, say a data recovery software scan on it and potentially recover things even after formatting.
To format your RAW hard drive:
1. Open file Explorer, and then right, click on your drive
2. Hit format than in the window that comes up, leave all the options as default, except change the file system to exFAT,
3. Make sure you enable the quick format option.
4. Click on start and that'll format the drive.
5. Once you're finished with the format, I highly recommend that you go back to the first method and scan the drive with Disk Drill data recovery software. And that should give you a decent shot at actually pulling data off the drive.

#harddrive #datarecovery

📌 These videos might be useful for you:
How to Fix External Hard Drive Not Showing Up: https://youtu.be/YWSC-NTAkYE
How to Recover Data from a Formatted HDD: https://youtu.be/hGPcGeVSPBE

📌 SUBSCRIBE for more data recovery tips: https://www.youtube.com/c/Cleverfiles?sub_confirmation=1

Тэги:

#raw_partition_recovery #raw_partition_data_recovery_software #hdd_raw_partition_data_recovery #fix_raw_drive_without_format #to_fix_raw_drive_without_format #raw_drive_recovery_without_losing_data #raw_partition_data_recovery #fix_raw_partition #raw_hdd_partition_and_no_data_loss #raw_hdd_fix_partition

Скачать видео