I had Three Temperature Problems with this $1000 Ryzen 7 Gaming PC I Built.

Is Ali express actually safe ? I've always been hesitant for buy from them 😅

Nice build :) In my experience most am5 cpus can do -20 on co. If you manually tune using occt avx2 extreme you can usually lock in values for each core quick. My best sample does an av of -41 co, my worst -24 and I've build 4 7800x3d setups. As for gpu undervolt try something like 1650@750mv. Voltagefloor before vram downclock to 5GHz is 725-756mv on all 6 30-series cards I've had.

Side Fans should be mounted at bottom as intake and backside fan should be intake too. Temps will improve significantly 🌬️🚀

Place on the side and top could be left wo fans or outtake.

3080ti is considered midrange now ? 😅

unfortunately aliexpress isnt a thing here :(

That is my CPU i have in Australia but paid 450 dollars when they first came out years ago the 7 7700

How much power does it draw ??

You could try putting 2 intake fans at the bottom and 2 exhaust at the top.

geat bro with your astuces but i say this tuto help me many🎉🎉🎉🎉

Rtx3080Ti is a heater, 7700 is ok but the tower stock cpu cooler is what is it, meh. Undervolt and disable PBO/overclock on both. In addition 3 fans in a little case is something that struggle. I use an open-case Streacom DA6 with no fans.
I have 70°C limit on my 7600x, NH-C14S never pass 300rpm, -20cu, don't care on productivity so without 100% multicore load i have all the performance i need, absolute silence and fresh air, with an undervolted 4070.

rtx 3080ti is not mid range

My I5 12400F with an ID Cooling FrostFlow X 280 max temp is 45C and under 100% load it peaks out at 42-43C at 56/57w of power. My RTX 3050 8GB peaks out at 65C at 127w of power and is not undervolted yet. Both my cpu and gpu is not even undervolted so I can get even lower temps if i want. This was in a room tempreture of 21-22C.

What did we learn here kids? Well, things we already knew: cases with no front ventilation suck and Ventus models have lousy fans and poor cooling characteristics...

Maybe add fans to the bottom of the case so you get actual intake? All the other fans are exhaust. A 3 pack of thermalright argb fans is like $14

cant believe you left the original paste there mate :)

The 3080ti should be enough to get the average gamer some sweet FPS, for quite some time to come.

Wanna fix a good deal of your temp issues,get rid of that fishbowl case,get an airflow mesh case like a Phanteks P400/corsair Air4000/Bequiet silent base 802..I will never understand those ridiculous fishbowl cases. And you can find cheaper mesh type cases than those I listed if budget is issue. Under volt tuning on cpu/gpu,or complete manual custom tuning on everything cpu/ram/gpu/vram..Next find good thermal pads/tpm and replace all the others in that system. Good paste if your not into LM,Thermal Grizzly Kryonaut extreme, Kingpin Lpx don’t waste your time on other brands of thermal paste. And for air cooler Noctua/Deepcool, Liquid cooling if not custom loops , then Arctic Liquid Freezer AIO. That would be my recommendations,better planning on all the gear before buying.

Got the 7700 from AliExpress thanks to your old video. It's identical to my 7800x3d in Timespy cpu test, and wins in cinebench. Both machines are pbo tuned.

12400f with 32gb ddr5 and a 4070 12GB playing in 2k; should I upgrade to a faster processor to play doom dark ages?

got a wraith prism for $10 AUD, really good cooler for that price. People want stupid amounts like $50-80 AUD for them. The stock wrait stealth is way too loud so highly recommend the prism over it.

How much is AM Dip just unstable memory, or memory correction stopping a bad OC from crashing? when i had a 5900X and Tuned B die, it all seemed fine to me. I mostly played locked to 120fps or 90fps for more demanding stuff.

7700 looks neat for the price. I was totally on the 12th and 13th gen bandwagon when the core voltage shenanigans was going off. 200CAD 12600K was amazing value last year paired with cheap G skill viper B die. 4.8-5.ghz core lock at 1.25V with a Hyper 212 and 3600C14 B die. You were golden.

Thats why you dont use TMI thats already put on, you clean that off and get some extra stuff, thats really good or atleast good enuff and affordable (like Arctic MX-6) and use that, as the preapplied or delivered stuff is usually quite cheap and bad and the Boxed Cooler...well its "sufficient" but far from good, 10 Bucks more, would've gotten you much more capable ones.

The 3080Ti well its a 3000Series High End GPU and they get hot by default, its the same with my 3080 Aorus Master 12GB that sucks up to 430Watts and gets up to 80°C under full load and summertemps over 25°C.
And Ventus equals "Twin Frozr" and those were always cheap and suboptimal performing in terms of their coolers.

Also, if i saw that right, all the fans are exhaust fans and the bottom is empty...well that turns the case into a dustsucker with suboptimal airflow, as there is no real intake and the exhaust has to drag air in, while trying to get the hot stuff out and will do so thru every nook and cranny.
And even if the side mounted ones were intakes, it would still be to few for the amount of heat generated, with then just one 120er exhaust...the case simply sucks ass for a high performance system.

We really considering a 3080ti a mid-range??? I understand its older but damn lol. Great video tho otherwise!

maybe using a real cpu cooler and adding enough case fans would improve temps? obvious suggestion 🤔

3080 TI should of been tested in 1440p

Had my evga 3080ti ftw @65% fan when gaming

Calling a 3080Ti mid-range made me feel inadequate.

Something seems off with the numbers. You should be getting better performance. Maybe there's something wrong with the gpu.

i won't even wait for this video to finish to make this comment :
you combine an almost no-name PSU (*personally never heard this brand in Europe at least) with an ...RTX3080Ti (*one of the most power-demanding GPUs ,regarding power-spikes & transient loads) ???? to me sounds an extremely bad idea ,unless this PSU is top-notch ,yet ,as i said ,never heard this brand...
spending close to 700-800 dollars for a GPU and trying to "cut-corners" from the parts which "feeds" this GPU is something i'll never understand... (*though as i said perhaps this is a quality PSU that i never heard before ,who knows... )

FSP has some knock off cases out there, the best one I had was one with a hepa filter like just choke off the internals. I used that to stay in touch while I was rebuilding my house.

现在有些风扇有反转扇提供 所以那种鱼缸海景房一般是5反转1正外加上面360冷排的三个往上比较合适😂 不过我没装过不知道这么多风扇噪音会不会感人

Tech Cut Some Corners Yes 😅

RTX 3080Ti is a midrange card according to you. WOW! Maybe you are too rich

How many watts does it use? Planning on using a 650W psu for a power efficient build

Did they not include reverse flow fans? The fans on the side should be exhaust for this type of case layout to function well...

what mobo would you get instead

I sure hope those side fans are reverse style fans, otherwise you're totally in Negative pressure situation. Which means you have 0 fans blowing air into the case to cool those components. I should also mention that for the 3080ti, you should use PTM7950. My 3080ti Stix had a really bad thermal paste pump out until I swapped to PTM.

After careful consideration I'm keeping my 3600 and GTX 1070 this pc sucks😂

woah that ken sf2 theme gave me back to my childhood.

850W PSU link is not good

Another video with a SCAM AD = Another thumb down.

I'm using 3080ti and Be Quiet case, and the GPU is always at 83C which is very annoying.
Not sure what can be done here, replaced my AIO CPU cooler and added fans to top and yet nothing.

I'm not that good with changing the settings etc and don't want to ruin my GPU :(

Please don't call the 3080 ti mid range...

My guess about whats getting bad temps before watching:
-CPU
-RAM
-VRAM

I think the Ryzen 7 7700 is THE Cpu to get right now, though what about GPUs? Which GPU would you pair (for the money) with this Ryzen?