TOTAL CHAOS Upper Control Arm (UCA) Bushing Maintenance

What about heim joints?

don't blow out your bushing. keep it lubricated.

How often do you guys recommend greasing the bushing and the uniball?

Torque spec would've been nice at the end.

What's the torque spec

What kind of grease do you guys recommend? Can I just use NLGI #2 that I use for my u-joints? It's a calcium base - amsoil.

My bushings are completely worn out. Where can I buy new ones? Do you know the size bushings I should order?

Can I replace the Total chaos UCA polyurethane bushings with another bushing that won’t be an issue & squeaky noisy , I’m frustrated with the polyurethane bushings , definitely not made for a daily driver , just they look cool , but that damn noise & yes I grease the UCA’s. Too much maintenance

That control are is wicked cool

Torque specs would be helpful I agree

Do you have to have the truck on a jack or lift? Or can I have wheels on the ground?

hay .. yesterday i repair my friend toyota hilux 4X4 suspention...
i replace that all the uper arm bushes, ball joint, lower arm bushes, ball joint, rack end, tie rod, stabilizer cut bushes, stabilizer bar link..
but there is noise when i get the full turn in one side to side.. i cant found it... plz give me the answers.. but alignment is ok..

Thank you !!! Now I know I fucked up the first time 😭

FuckIng 700 dollars for a couple bushings, about 24 inches of pipe and a uni-ball

Thats rediculous

What kind of grease?

Will these fit a holden Colorado 2011 model .. and price

Una pregunta, la distancia entre la base del chasis y la rótula de la espiga, es igual a la del brazo original ?

Great video wish I seen this about a year ago.

Why it doesnt use dual durometer bushing?

What can be done to stop these bushings from being so squeaky when going over any slight bump in the roadway? I've greased exactly as seen here, yet they remain squeaky.

are these control arms made of aluminum?

Where can I get a replacement balljoint kit and through bolts and alignment inserts

Others have already said it, but to add my voice: a couple bits of info would be nice: type of grease for polyurethane bushings, and torque specs would be nice.

After you grease the UCA bushings, what do torque down the through bolts too? Also do you have to remove the wheel to grease the UCA?

So now that Ive done these. Cant get caster alignment close at all. Truck rides like garbage and 3 alignment shops later no fix. Horrible choice to install these with the gusset kit for a daily driver. Do you offer fixes to bring caster back into spec, lower the coilover?

Do you have to disconnect the upper ball joint from steering knuckle? Trying to be less invasive.

How many torque pounds do you torque the nut too?

Thanks buddy!

These thing need to have engineering specifications available for customers.

My TC UCAs are 8 years old and squeak like I’m holding seagulls hostage in my undercarriage. How many pumps are expected, I’ve got + 200k miles on my pair. 2010 Toyo FJ. 3” Toytec Billstein setup too. Thanks

Make a bushings replacement video please!!!!

If grease can ruin a bushing in your UCAs what about the abuse i will put those bushings through. How often you need to grease.

With my bolt completely loose I still have one of my bushings deform and can’t figure out why.

i greased mine and they are still squeaking, not sure what i should do next.