Toyota 4x4 brake modification makes broken Birfield access much quicker! Quick release caliper.

55 лет назад

59,956 Просмотров

Toyota for some reason made the mount for the brake caliper hardline a trapped unit. Because of the way it was designed you have to disconnect the brake line if you want to remove the caliper from the steering knuckle, or if you want to remove the knuckle from the axle.

Even under shop conditions I hate bleeding brakes, so imagine how much fun it is if you would have to open the brake lines out on the trail (like when you're fixing a blown Birfield joint.) Spilling brake fluid on the ground out in the woods is not cool either. This mod allows you to remove the caliper while the brake hard line and flexible line are still attached. If you don't have to open the system, you don't have to bleed after you put it back together.

This mod alos comes in super handy in the shop. As you can eliminate the brake bleeding step in any job that requires that you remove the caliper (Wheel bearing adjustment, rotor replacement, steering knuckle removal, etc.) If you don't have to bleed the brakes you just saved yourself a bunch of time. If you've had to disconnect the brake hard line at the caliper, his trick also makes getting that tiny brake hard line fitting that mounts under the bracket started into the soft line fitting threads a breeze.

This is the first mod that I do to any Solid Front Axle (SFA) Toyota that wanders into my life. It's such an easy mod I'm just dumbfounded that Toyota didn't make the brackets like this from the get-go. Maybe it was a planned move to increase the service time...increased service time = more money in the service department's pocket...

Тэги: