Racing The FASTEST 3D Printer

For those who actually want a bambu, don't waste your money on the X1. It's like a $300 markup over their new model just for the lidar, which is 100% unnecessary. You can literally tape over the lidar sensor and it makes zero difference. And bambu is silent on feedback about the lidar. Spaghetti detection is a gimmick and doesn't even work, lidar is a gimmick and makes zero difference to the calibration or print. Auto flow calibration is also a gimmick and nobody uses it. 1st layer calibration is pointless. You can literally print the calibration flow lines, peel the lines off and the sensor will just pick a line that doesn't exist.

When people do their prints on their X1, they turn off the flow calibration, they turn off the 1st layer inspection, and they tun off the vibration calibration. Basically everything that uses the lidar, they turn off. Meaning they spent and extra $300 for a sensor that nobody uses.

Was this printed on stock settings? There is a "Ludicrous Mode" setting in the printer that might beat you :)

Speed is important but the most important part of any 3d printer is to be able to fix anything that is broken and/or replace nozzle etc, bambu labs printers lacking in that heavily. You almost need to buy new one if something stopped working. As soon their printers would be easy to maintance and even modular - they will conquer the 3d printing world.

Awesome video!

This is actually a very good video. I loved the race and the printer demo.

Mines coming today, still have a bit of time to use it to print toys for tots 👌

As Bamboo gets more popular I do wish prominent community members would raise awareness for open source projects like the Voron. A lot of the progress we have today in 3d printing we owe to the amazing open source community surrounding FDM printing. The Carbon is a fantastic machine, especially for how pick up and play it is, but the more market share closed source machines with proprietary parts gain, the closer we inch towards the consumer grade MSLA resin printer market full off proprietary hardware, subscription software, encrypted slice files, and other practices that stifle open source benefits for the community.

what about that print which failed while you were at the store? ;) And btw, maybe driver "did not see you" because with that monowheel you move too fast as for the pedestrian?

Put a patio paver brick underneath to help lower the vibration.

Dat V400 tho.

You will love this printer. Mine has been going non stop since I got it. Yes there are some fails, nothing is perfect. I’ve had to take apart the extruder to clear it once. But dange prints are nice and the fact I can print ABS without issues makes me happy.
Also get a PEI textured sheet. The stickers are horrible. I went through three in four days. PETG ripped them. Bought mine off Aliexpress from energetic

I guess you could also say if you were comparing apples to apples you'd also have to include the file loading time and designing or downloading time, etc. That being said, it looks like a real step up with a lot of great features right out of the box, and because i've been considering upgrading to a Prusa eventually, this is now a serious contender, whereas before it was really just one choice.

You might want to keep it on a concrete block resting on rubber/dense foam. Should damp some of the vibrations.

Haha love it. Remember you also risked your life multiple times, had to deal with the stress of shopping, and had to pay probably 10 times the cost of the raw filament you used printing 😁 Pls if you stay home while that's printing you can do something else in that 40 min. Design something else, do laundry, watch cartoons. Anything 😁

Fantastic Video as always Morley! It was so cool to see your family and how much they love and support your 3D printing. It was an awesome concept racing the printer, and I can't wait to see all the things you make with the Bamboo X1 Carbon; please make more videos on this printer as I have been debating buying one for a while and am on the fence. I want the MK3S+ or the Bamboo, and your videos are obviously perfect for the comparison! Thanks for all you do and your hard work on these videos. We absolutely love them!

Wanted to order one, but its not out yet? And why did you closed the pri ter wile printing pla? It should have air flow so its not getting warm inside?

LET'S GO! Way to go bambu lab! Good looking out!

Great video, that printer looks awesome definitely a step above current printers 😍

love the urgency of the race! haha sooo good! also loved that audio change at the store! haha

cathy kert cameo finally! haha

i didn't knew Atlanta was available on Netflix here in Brazil lol

Awesome video man! Really digging this new direction (pretty sure ive said that before...). Keep it going!

Try putting the printer on a thick NBR foam yoga mat. It might cut down on some of the noise. I have found that printers there are 3 sources of noise, the motors, the fans and the printer vibrating on the table. The mat helps the third. You can add sound dampening on the inside if you wanted too

Awesome!

For the FIFA fans , may you 3D-print the FIFA trophy.

hi i dont use glue stick i use 3DLac it works great.

Simp

Nice work Morley, 'I got free stuff' videos are tricky to make interesting, you've done well!

Get yourself a WhamBam Pex plate, you wont ever go back to the original buiild sheets

This might've finally sold me on the S1 Carbon...

You know with your wisdom on making new furniture stuff with wood im surprise you haven't made your own stuff and put it towards your studio.

Use hairspray instead of the glue stick Aquanet is the brand everyone recommends

How do we bypass the 7 min calibration every print?

Didn't know there was a Loki variant in my universe that was into 3D printing stuff, great video dude!

The vzbot vz330 its crazy more faster

You can get an even faster printer now like the svo8 for a third the price

Thanks for wearing a helmet!!

great video i have the p1s the one like it but a little less niche

I purchased the A1 3D printer, and because of the black friday sale on right now, it was just $299. The print quality is perfect. The speed is the same as X1C, as in super fast especially with sport mode (which you should have tried!). The ease of use is amazing (wifi capabilities, auto bed leveling, filament failiure detection). And it has an incredible powerful slicer and maker world community.

I can't recommend it enough for people who saw this video and were turned off by the price. You can get the AMS version for only $449, which I wish I had because the things you can make with it on maker world look so fun.

Why you so cute bro

vorons crying in the corner

Do you live in Toronto or British Columbia Vancouver

Ok so bambulab. Everyone talks about it. Everyone says it’s the best printer. But the reason I would not pick ANY of bambulab printers is because of their IMPOSSIBLY HARD CPNSTRUCTION. I mean 1 Z acsis rail?! How is this even possible this thing gonna being offset when I add pressure to it! Reality is better printer because it’s not that complex. Install and ready to go. With everything calibrated (if the printer is YX core) or very VERY upgradable.

Isn't it a better learning experience if you have to build it yourself?

awsome vid instantly subbed

Try printing some TPU feet - I had the same problem with vibration and this seemed to help. The X1 carbon is awesome