Mistakes “Pro’s” Make Buying Wheels and Tires

Fitment industry ahh video

lol.. I am 52 and I have never set an alarm since grade school.

Trusting the CO gallery.. yall don't verify shit.

YOU CANNOT fit a 22x12 and 37s on a 19+ Ram HD with a 4" lift with NO trimming and No rubbing . It's not possible

Literally went out to measure my “33x12.50” cheaper brand tires and yup we are missing 3/4 to an inch in diameter.

I need to make payments lol on some 24x12s

Looking for some 26 in flat wheels for Ford. F250 no poke out no lift

Looking for some 24-in flat wheels for a 2004 f250 8 lugs

Dang get off the caffeine. The content is good but I can't take the yelling

I just got 22x12 to sit inside a 35x12.5 6in lift

Biggest mistake was not knowing the correlation between load index and load range. My truck calls for Load Range D but does not specify load index. So I got some 35x12.50R22 117 Load index Load Range E, thinking they would be fine. Well, they would be, if I wanted to run them at 60PSI. But the factory tire pressure is 42PSI. So for this size, I need a 127 Load Range F. Why F? Because all that the letter indicates is the maximum acceptable pressure. For example, the 121 Load Index Load Range E has about the same load capacity at 42PSI as a 127 Load Range F. This is because the load index is calculated at the MAX PSI. For LR-E it is 65PSI for tires like these, and LR-F is 80PSI for tires like these. SO when you do the calculation, a 121 Load Index with Load Range D has MORE load carrying capability at the same PSI than a 121 Load Index with Load Range E. This is because the 121 load rating is now measured at 65 PSI rather than 50PSI. The only benefit from a higher load range is that you get to run the tire at higher PSI and because of that, you end up getting more load carrying capability. but ONLY NEAR max PSI. So now i have to dismount and remount new tires and rebalance that meet the load carrying spec for safety.

I bought a set of rockstar rims. Enough said.

My fuel contras (24x14) are arriving in 7 days, I’m wrapping them in a set of 35x13.50 r24 venoms a/t for a little bit of a stretched look on my Jeep. I hope it goes well

Too big offset

Not looking for a crack on the lip

hello i was told if i put bigger than a 22 inch rim on my 2024 gmc 1500 slt my front end would go bad and gear ratio change

Going to a non reputable shop to buy wheels and a lift I had a 3 inch lift and 20x8s after I paid for 20x12s and they wouldn’t change them or give me my money back 😂

F 12ply 🤟🏼

Those lifted trucks on low profile tires look so stupid. Biggest mistake you could make.

Biggest mistake I ever made was buying super swampers for my daily driver YJ.

How do you know the hub of your after market wheels will fit for sure?

I just bought the Venom Power Terra Hunter XT 33x12.50r20 load rating 119, they drive really well, I notice that on the tire cold it say 80 PSI, my TPM in the Silverado indicate 40 psi, I just got them installed, so my question is at what PSI you keep yours cold?

Im putting 2.50 leveling front, 2inch rear leveling kit on 2022 z71, it has 20x9 factory wheels. Will 33-12.50-20 fit and what off set do i need for poke to be 1 inch or less outside of fender?

Bro, you look like that guy from pawn stars Cory.

Biggest mistake that I made was when I thought I could put truck wheels and tires on a car!😂 A big WTF moment!

Yall be taxing on the tires 😂

If I buy tires and wheels and have you Mount them. What do I do about my Factory TPMS?

Biggest mistake was thinking I knew what I was buying when I didn’t because rn I have 20x10s but they are going to be my winter wheels and I already have my 24x14s ready for summer

i have a leveled 2016 ram 1500 4x4 with factory 20x9 wrapped on 35x12.50x20 and i want to purchase some wheels and want to go with some 20x12s -44 would it actually rub more cause i had to trim a little ?? thanks

Biggest mistake I see everyone make. “I thought they’d look bigger” Start with the biggest setup you can afford. They look a lot less aggressive in person. Especially when you see someone else’s BIG setup next to yours. 😎

Biggest mistake- not checking the lug dimensions first and got something that didn’t fit so had to get adapters

Dustin is a beast in front of the camera! He needs to be hosting TMZ or some shit!!!!! 💯

I personally work at a tire shop where i live and i will be the first to say that yes we do takecare of all wheels and tires especailly if there new. However it is possible for something maybe to be in the wrong position and put a nice scratch across your brand new Akrons. I would strongly recommend letting them do the mounting and balancing for you cause in the end if they damage they will replace. Seams like a win in my books.

i have a 02 ford ranger and i don't want to blow money on tires then have to get a lift

Biggest mistake I made...not getting enough double stuffed OreoS!
On a side note...looking for a nice set of wheels and tires for my F350 4x4 C C. L.B. I will know them when I see them

What the heck is wrong with double stuffed Oreo'S?

Should have gotten 17s with less offset instead of the 20s with the semi aggressive offset that I did 🤷‍♂️

Mistakes I make. Watching videos that take 7 minutes to even get to the point if the video. Lol. Jk. Great video man.

Geez thanks for yelling the info to me…and for the love of god, take some Ritalin and stop bouncing all over the place. I don’t doubt you know what you’re talking about, but your presentation makes this unwatchable

This guy is the shit

Is having a tax professional file ur taxes and getting you more money legit

dustin is really good at his job lol

Another one that no one tells u big wheels example 24X14 is fucking up ur suspensions 🤦🏻🦅

Damn Dude you bounce around a lot!

That I could of just bought a leveling kit to fit 35s on the truck

My worst one: not spending a little more cash and getting A/T tires on my first truck’s wheel setup. Went with all seasons and regretted it (got A/Ts after they wore out).

Bought Federal Couragias.... RARARARARARARARARARARARARARA.... sumbitches are loud AF on pavement.

Getting a 7in lift kit with 24x12 tires on my 2018 Chevy Silverado 2WD do you think it will rub ?

Hey guys how are those venom tires
Are they loud?
And how are they in the snow and in the rain?

The woes of a mall crawler... So sad