Multi-engine ESC Wiring

Man I've been looking for this. I'm trying to hookup the newbright rzr . Do u know of any controlers that can control another reseavers, I had control of a friend's granite grome using my granite grooms controler, esc reserver combo . Can boath reseavers even reseave a signal from the one transmitter at the same time. Great vidio

Please tell mee how to buy battery Y adapter whats the name of thish adapter?

PERHAPS, YOU MIGHT CONSIDER DOING A VIDEO(S), ON CHOOSING VARIOUS SIZED MOTORS, (BRUSHLESS, OUTRUNNER, INRUNNER, BRUSHED, AND OTHERS(?), AND PROPELLER SELECTION, AND AIRCRAFT PERFORMANCE vs WEIGHT & THRUST, AND "RPMS"...???!!!

THANK YOU, FOR THIS, EXCELLENT TUTORIAL, ON THIS ASPECT OF MOTOR/BATTERY/ESC/RECEIVER CONNECTIONS!! AWESOME!!!!! MUCH APPRECIATED!!

CAN YOU RECOMMEND ANY GOOD REFERENCE BOOKS, THAT HAVE GOOD INFORMATION, ON DESIGNING/ASSEMBLING/COMPILING "MULTI-MOTOR" ELECTRIC AIRPLANE SYSTEMS??!!!...

😊👍👍👍

pertty nice, also what could be added as benefit of parallel BEC in addition of redundancy, is that you get twice much power : so 2 BEC capped at 2 Amps become stronger BEC at 4 Amp, even if i am aware that your plane will not need it

Very good video, tells what u need know i very good way. Thanks for making this 😃

Hello, I have a problem, I dual wired 2 esc to 2 motor (I welded the 2 battery plugs and 2 reciever plugs together but left out the one red cable.) but when I try it out (both motors used to spin equally) only one motor spins. The other one twitches and sometimes rotates really slow while the other one has no problem. Do you know whats going on? (The 2 motors are identical btw) because I want to do this before all h*** breaks loose

Thanks so much brother, you have helped me gain an understanding on how to upgrade the all in one flight controller for my helicoper to something I can bind my spektrum controller with.

How about 3 esc and 1 receiver?

So this setup can be applied too on RC car with two motors?

Thanks.

How do you make the wire adapter

Brill post. Very informative 👌👌👌👌

Very helpful thanks 😊

Thank you for the tutorial on multi engine esc wiring, and one queation is why is one esc unplugged from the connection pin??

Hello. How do I do it if I also want to steer left and right?

Hey hi
I am a huge fan of your video
I have some doubts

Why does my lipo battery (lemon 2200mah,11.1volt,3s,30c) spark continuously while i try to connect to my esc (30a (deans connecter))
Maybe is it because of friction

I am actually making a plane
And I am using the battery mentioned above and the 30a esc and 2 servos and a 2200kv brushless motor
And do u have any idea of the total flight time.

Helpful video, Thanks, but what about if I want to use 4 motors?

I know this is an old video but thank you for this one, it has helped me greatly. Thank you. Terry

Where can I find a two female one male y harness two connect my two ESC to one Lopo battery?

If they turn inward opposite directions don't you need 2 different propellers?? Or both the same???

You vids on wiring are very good.

Thanks very concise

just a beautiful explanation of a how to. short concise and most importantly, it has a short time (unlike my comment) and teaches you all the variables and options. one question though. does the same thing apply for EDFs? im assuming so since its just the same motors but with a "jacket" on i guess.

have the same situation. I want to connect two secs to one receiver. But how dose the receiver without the positive work? Can you please tell me. Thank you

Thank you

hi can u pls help me i did every thing u did but when i throttle the esc with the red wire is moving faster than the other pls help

lodgment

👍👍👍

Question, say for example I wire both my ESCs through the y harness and I lift the red wire out of one of them. If i chose to switch off the master esc (the one that still has it's red wire) what will happen to the slave? (the esc that doesn't have it's red wire) Will the slave work perfectly on it's own?

just show me the diagram! holy crap man

10 years ago with this video and editing quality, wow 👌

This helped me so so much thank you!!! I will now Hook up 10 ecs for no reason other then I can lol

Does this work for three esc

Does any one make a dual brushless esc on eBay

how do i control the motor without a reciever ?

Sir please tell me how to calibrate those motors simultaneously...i have done same as described by you but my motors are not running on the same rpm..plz help

I will try stering 2 engines seperately on stm32

what electric engine is the the same as a .15 engine...?

so Good video.

Do you need to use two batteries? Can they be wires to the same one?

I dont see any problem with both esc supplying power to the receiver. in fact the Y connected still has red wire on both sides, that means you can combine power from two ESCs, and that is good for redundancy; when the other ESC shuts off, you still have the other one. Having them both connected won't double the voltage, only the current, which is not a problem because the receiver and servos will only draw the current that they need. If you use both ESC's BEC , it will still be 5 volts. But of course we have to make sure that both ESC's are identical to avoid imbalance.

Good job

Extremely helpful, Thanks.

right side prop is onbackwards.
but thanks for the info you helped me alot

Can someone please help me in instructions on how to put rc electronics in a linburg pt109

How the power is devided by the ESCs?

Hello. Very informative video. I am experimenting on bypassing the joystick on a wheelchair and it appears that this system is inline with what I might need to control the chair without the need for the joystick mounted on the chair. I imagine that this system will not produce the power needed to pilot the chair, but my question is if you have any suggestions as to a system that might.