Комментарии:
Everything explained well, thanks for the video. But it is not a good idea to place the battery computer where the hot air comes from the heater. I wouldn't put the charger in the box over the pipe inside either, it gets up to 80 degrees hot. Many greetings from Germany
ОтветитьNice install mate
ОтветитьThanks for sharing your installation experience, mate.
ОтветитьGood job mate well done 👏 ✔️ 👍
ОтветитьAlmost identical to mine
The dcdc charger gets hot when running of the alternator
Itech make great products, my office is 5mins away in WA
Great instal very simple diy
Great job doing the installation mate.
I have just done the exact setup using all ITechWorld gear.
Just a question I noticed on the 2000 watt inverter no earth wire.
I read through the instructions and I also rang the guys in Perth.
They said to run the earth wire from that small bolt back to the negative coming in from the battery.
Are you aware the 120x have 105 usable amps.
The new 120x pro have 120 usable amps.
I have had my batteries in the van now 4 years and no complaints so far.
Be sure you have an rcbo safety device between the inverter and 240v appliances. Without a proper safety device installed any earthed appliances being used can be dangerous if a fault occurs.
ОтветитьGood job, I saw a YT vid recently where the guy only got about 95 ah from the itech 120A battery, so this might be something to test &/or factor in. Enjoying ur vids. Cheers
ОтветитьAre you related to Pez?
ОтветитьOpen the top of the van man!
ОтветитьThanks for the video - can I ask how or what you are connecting to the inverter, and how are you doing that? Are you running all 240 volt plugs etc? Thanks mate
ОтветитьWhy is iTech so expensive? I saw their complete kits, $7,000 or something. I'm hoping to do my setup for $750-$1000
Ответить