Комментарии:
Very Cool.
ОтветитьLooking very good. Love the simplicity.
ОтветитьThis is awesome
ОтветитьWill this fill any airgun that's a PCP?
I'm new to airgunning, been doing it for about a year now, so I'm learning everything as I go.
If this is compatible to all PCP's I probably will make the investment and get one.
Thanks for the video...I always enjoy your stuff!
You packed it all into a nifty little package and it couldn't havent gotten that hot if you're touching that piston head right after a fill. Nice
ОтветитьAnd how long did it take?
ОтветитьI'll be looking at buying one it will go along good with my Umarex Origin
ОтветитьNext generation of pcp airgun:. Auto reload airgas pump in one unit.mecanical and electronical system with small batre but powerfull.🙂
ОтветитьCool. But do you really find it nessesary to tell people what to do as they wait. Ridiculous.
ОтветитьCan you fill a 100 cubic inch bottle with this?
ОтветитьCool product, one year warranty is sort of a let down however.
ОтветитьHope this compressor had a good usefull life
ОтветитьI'm buying it simply for the temperature reading in fahrenheit!!
ОтветитьCan you fill carbon tanks with it ?
ОтветитьCompetitive price
Ответитьwhere can i find ammo for my hammer i have looked everywhere on line for the 350 gr and no luck.
ОтветитьDo not buy it is junk !!! Mine broke after the first week
ОтветитьI am asking anyone this question, If you have an Umarex Legends MP40 Semi/Full auto Submachine Gun? and if you think it is possible to build a system that would use either air handpumps, HPA tanks, and PCP for the legends MP40 to be fitted with a regulator, fitting, and air hose to go where the clips piercing plug, screw that goes into the Legends MP40's clip...To use compressed air instead of the CO2 air. ??? So as to not have to deal with cold air, freeze up's with CO2.
ОтветитьI would like to buy one, but they are out of stock, any idea when it will be available again?
ОтветитьHad hopes for this compressor but it is way to loud
ОтветитьCan you fill a 13ci or 15ci paintball tank with this?
ОтветитьCan you program the pressure so it doesn't need adjusted each fill? I'm guessing so with "set" button.
ОтветитьIm assuming this will work with both the Brocock Sniper XR & FX Crown MK2?
Ответитьcan you use any air compressor?
ОтветитьI've yet to come across a High Pressure PCP Compressor that actually will hold up and work reliably. Most seem to break down after a few uses and the reviews I've read for the one in this video have mostly been horribly bad. Save yourself a headache and get a 75 or 100 Cu ft 4500PSI SCBA Bottle unless you want to spend weeks rebuilding high pressure air compressors. This is just my opinion only but it seems like they buy cheap bulk compressors from overseas and stick American company labels on them and jack the price up a few 100% and then sell them to us. READ THE REVIEWS FROM MULTIOLE THREADS!!!!!!!!
ОтветитьHi, I just received my airsaber elitex2. I purchased the compressor months ago. I set it all up according to the manual and your video. It has run for over forty minutes and has not registered on the pump or gun. It ran at 127 degrees. I turned it off and it is cooling down now. I could not feel any air escaping from the compressor or gun when attempting to fill the rifle, and even sprayed a little soapy water on it and there were no air bubbles. I need to find a plan B. By the way. The air rifle looks great.
ОтветитьI posted a comment earlier today on the video. I have now done some trouble shooting and have found that when the compressor is charging, the air is coming out of both air tubes that the arrows slide on to. So, it will not show it charging on the compressor or the rifle. If I hold my fingers to block the air from escaping from the tubes, the compressor immediately shows that it is taking a charge. Of course I can not hold my fingers over the tubes for very long because of the build up pressure. Am I doing something wrong for this to happen?
ОтветитьHi I live in the UK so have all the bother of licenses if above 12ft/lbs so I was wondering is there a way I could get a legal gun at that power but being able to increase the power somehow that would return back to normal power once I've used some of the air perhaps there's an adjustable chamber size or something any tips,tools or methods that I'd find helpful thanks I know using different gases can do it but they need different seals plus the legal issues ideally a secret part that can be changed to increase power but be switched off if ever looked at by officials thanks, also maybe you know of such a gun if so I'd be interested in your thoughts cheers
ОтветитьGlaces for what 😅😅😅😅😅
ОтветитьTo slow to loud to expensive
ОтветитьHow much moisture makes it through to the gun also why does it cost the equivalent of $990 (£779.00) in the UK?
ОтветитьDoes it come with the 12 volt DC connection and 110 cord already assembled?
Ответить