TRZ Billet spindle TBM brake install on Doug's Nova

Id love to have a set of tbm brakes on my foxbody but i can't afford 1500 bucks just for front brakes, then another 1500 for the rear, im goin 160 with no parachute and drum brakes lol 4 lug thug still

Can ya make some for a 85 c-10. 5x5 lug pattern.

Super impressive you're attention to detail and passion for making improvements.

Start to finish brake line plumbing videoooo 🙏🏻🙏🏻🙏🏻

👍

Will you guys have a vented street rotor for the Foxbody? 4 and/or 5 lug?

Nice job, well done. I was surprised that the rotor doesn't appear to have a locator to the hub, it appeared that the rotor to hub holes are slotted? Maybe I just missed that part. I agree with the Timken bearings over all the fancy stuff. Another thing I'd add is the use of wheel bearing spacer kit from DRP, they work great on our DLM and I'd figured they would work great in a drag drive/street application as well. Thanks for sharing the video!!!!

Thanks Doug

Check sound after 9 minutes, some overdrive in there (for the next video it's not that bad).
Interesting video.

Loctite is actually supposed to be used with a primer that they make to get the full advertised strength. I just found this out not too long ago. It's on the instructions printed on the bottle. 🤯

I was confused at the beginning after reading spindle mount… I thought you meant spindle mount wheels, brakes, hubs lol. My strange front spindle mount brakes really seem (to me) like they are too small but they work and still have the dual caliper strange on the back.

3350lbs bracket nova
Manual drums on mine
Can TBM make better all the way around????
I like the reviews

Impressive! Pretty cool that the wheel spun during Doug's closing remarks.

Your brakes are amazing I run your brakes on my monster truck. At the end of a freestyle run the rotors are glowing red hot and they still work flawlessly. I wouldn't run any other brake setup

Dumb question......if they are so good....any thoughts to start selling to maybe off road markets or more mainstream vehicles?! Just curious.

looking forward to a vented setup, hopefully parking brake capable as well!

I’m excited to see your street vented brakes. Are the hubs that you use safer than the corvette style cartridge hubs?

Thanks for givin the honest disclaimer. Brakes should be correct for the application and car and not looks. She’s looking so clean, almost tooo clean

What!!! No titanium wheel studs?

👍🏾👍🏾👍🏾👍🏾👍🏾