Enhanced Tarkov with DLSS and DLDSR! - Escape from Tarkov settings guide.

1x LPVO are fixed with the new 2.5.1 DLSS update!! I'll be running this for sure now!

would love new update on this please

I was pretty sad that my first rtx card couldn't play cyberpunk at a high a resolution and have max ray tracing at 30fps, but DLSS and DLDSR is MAGIC, absolute wizardry and the game somehow looks better than native. Upclose rough materials lose that native resolution sharpness but everything else just looks 10x better., my game finally looks like those crazy max settings, 100+ graphics mods videos. Can't wait to try it with other games.

Dldsr +dlss rendering at 1440p vs native 1440p graphics and performance?

So dldsr 1920p + dlss is better than 1440p native?

Can you try Dldsr with dlaa, I don't know if there is dlaa in the game, could you still test it in others?

I just leave most of the settings on medium because they genuinely don't change my fps whether they're on or not

hmm, my game just keep crashing lol. Got spec'd out comp too. rtx 4070 ryzen 9

every time i alt + tab from the game, resolution resets, im using ultra wide monitor, any advice?

It's not clear what to do if one is a 1440p user. I don't see a 1440p dsr specific setting.
however now it is said that Relfex should be turned off.
OMG.. the game at 3400.. looks absolutely amazing with quality on and 0.1 sharpness thanks so much for all these settings. I just turned the Reflex off as it is broken now someone says in the forumn. someone that redirected me to you.
I am just worried now fo temperatures. I want to keep the temps below 71 degrees so aroun 69 max... my vents have been reset after last bios update as usual so I have to get back to set them correctly... The back one wasn't even working during the offline test with your settings and I was around 70-71.. and junction was 86 ... but I wanna not move above these... anyway. I don't care for my case noise.
This is still working but please update it after 13.5 August 2023.
Also again and again thanks I was looking for a tuttorial telling how how to play with good effects and also explanations.. infact I kept up some stuff as I don't want to have easy super life spotting things. for me it's ok to trade immersion potential of failure of getting ambushed.

u have to do same work here to new patch they add 13.5 , i got i9--9900k and 4070Ti and running the game with around 100, but maybe need new cpu for more fps on tarkov what do u think ?

Unfortunatelyt u can't choose the resolution anymore. The game automatically chooses it. So this can't now work anymore I hope though in the future.

Thank you, it looks amazing!

But you can't set it to Borderless, so you have to set to Fullscreen, then that creates a problem: when Alt+Tabbing you can notice it resets back to native resolution by the way it looks (although it doesn't show the wrong resolution in the settings).
Did you notice that? Any work around? I could only figure out 2, but both are annoying:

1) Esc + click Save, every time you Alt+Tab, that reapplies the settings.
2) Changing desktop's resolution to that DLDSR one you created, but that makes every text on programs looking blurry, even when changing DSR's Smoothness or Windows' ClearType settings.

--- EDIT: I figured it out! I posted the solution as a reply!

This is huge - changed my life. We need an updated version of this. You gotta give it to the community, my man!

What about Mip streaming, is it worth it now with a good set of rams and also cpu etc?

does this works with rtx 3050 8gb vram Desktop gpu?

I wish they would allow you to use DSC with DLDSR, I miss having the extra image quality.

What would be the alternative for AMD Graphics cards please? I run with a AMD RX 5700XT

So where is dldsr?

Have you how much the input lag has increased by doing this?

Wow, it looks super crisp. Ty.

Holy cow im so happy to find this video. I have a 1440p monitor but it is a large screen size (inches). This made it look like a whole new game. The trees and foliage used to have this kind of "watercolor painting" look to it but now it looks amazing. Thanks!

This is awesome! Thank you✊🏻
I used it on War Thunder too...TAA is just mess🫠

I never comment on anything but this deserves it. I have been playing tarkov for around 2 months and never been satisfied with my settings and this video has helped massively with visuals. My cpu is holding me back with higher frames but im finally content with my settings and wont be tinkering with them anymore thanks for the info 👍

i dont get the resolution but i did the same at DSR Factors? what can i do? pls help me :)

i have a geforce rtx card and the setting does not appear, i am on a laptop

Everyone who want to use it, try it out with FSR2
I think its much better that current implemntation of DLSS in EFT

Would this be worth doing on a rtx 2080 super and could you enable the dsr factor setting on just tarkov in stead of the global settings.

So if im an AMD user what would be the equivalent to this? Any help would be greatly appreciated

For YEARS now I have been searching for something to make Tarkov look better. I am basically looking at a brand new game after watching this video

what gpu are you using @chippawubba

dlss in tarkov blows
because it has forced taa which has a bad ghosting effect

This is cool, didn't know how to use that feature properly.

I was hoping more people knew about this increible sorcery and then I found your video, thanks for showing the people what DLDSR+DLSS can do!!!!!
Btw if you are running dldsr+dlss quality, you do not need antialaising at all.

The reason the FPS felt more stable is because tarkov, like many other games when playing online, does not fully utilize the GPU. Specfically games that love CPUs. Using DLDSR probably ramped your GPU up near 99% utilization at almost all times causing less fluctuations. Just make sure you keep reflex on + boost and input lag shouldn't be much different if noticeable!

@ChippaWubba This guide is awesome. It’s helps me so much. Thanks to creator! ❤

not sure why but this absolutley tanked my frames. in offline mode i was getting 20 fps. im on a rtx 2070 super so im not on the best card so maybe thats why?

when i change my resolution to one of those with DSR it automatically changes back to my native resolution. Do you know why is that?

I recommend settings dsr smoothness to 80 it doesn't make game look over sharpen while also fixing blur by minor sharpening

I use dldsr 2.25x+dlss on a 1440p monitor and get a crazy picture, but in Tarkov arena right now very often after a round (or after revival in last hero) I have a black screen (I can control the character, enter the settings, but I can't see anything) (after changing the resolution sometimes the problem disappears, but sometimes the game crashes).
I tried reinstalling the video card drov, but nothing helped, what to do?
the problem is only in tarkov, it's not in the hardware
I have rtx3080 ti 5700x3d 32gb ram,512gb ssd

So I watched some of your stream during this weeks drop event. You were hitting 300+fps in raid. Are you still using this? I have the same rig as you. 7950x3d 4090rtx. I have my curve optimizer ccd0 per core at -15 , ddr5 6000 with tight timings running 1440 I'm lucky to hold150 fps online. Maybe time for a new Chippa settings video. :)

This video and settings were game changing but there is just 2 issues for me.

1. I cannot play on that higher resolution on Borderless, I can only play it on fullscreen that leads me to my 2nd issue

2. When I play it on fullscreen I have 2 issues, 1 I prefer borderless because i ALT TAB very often and 2 my PC will randomly crash at times

Wondering does using dldsr 2.25x increase vram usage?

Awesome video, sadly I cannot turn of DSC on my monitor to allow DSR to be enabled. Ugh.

I have a 1440 p monitor, so I need to run the game at 4k? Even though my monitor doesn't support 4k?

I cannot see extra resolutions.

Tarkov Patch 16. Thanks for the video. I am posting this for others with similar systems. I loved the look using the settings that you suggested! The game has never look so good! This was my first time using Dlss let alone Dldsr in any game. Specs: 3060 ti (8gb), 64gm memory and an 8700k on a 2k monitor. With native resolution and medium textures, I would get about 55 FPS with using %20-%40 GPU and over 7 gigs of Vram (basically maxed out vram). * With your settings I started using about %60 gpu and lower 7 gigs of Vram, dipping into 6 gigs. My FPS dropped too much, usually about 38-44 FPS, but I would often get 22- 24 FPS. * I changed things up, going to low textures and your settings, but the image didn't look as nice as my initial settings, so I went back to what I started with. * I will try this again in the future when I can afford to upgrade to a used 12700k or 12900k as I assume that this is my main bottleneck with this game.

seems like to use the upscaling the game needs to be in full screen, thats simply a deal breaker no way im giving my monitor a stroke every time i minimize for whatever reason, or maybe im missing something but when i change the option it just changes back instantly

This is the ONLY VIDEO that helped me with my RTX 3080!!!! No more jitters, no more frame drops. I was getting 60-70fps on shoreline now im running 90-100. Thank you so much man!