HOW TO FIT A WALL HUNG TOILET - CONCEALED FRAME - Vitra auto flush

Can you install these toilets onto breeze blocks. I've purchased a wall hung toilet and frame but after ripping off the tiles off the current bathroom, I've found the wall that the toilet will be attaching to is breeze blocks. Help!? It seems so brittle and weak.

Such an enjoyable watch..does the cistern have an overflow?

Kenapa ada teks ganggu

welldone ! good job. you sorted out my problem....

My current commode is floor mounted but since my washroom is too small, I am planning to install wall mounted commode. Do you have any video on changing from floor mounted to wall mounted setup? TIA

Plumber, tiler, composer and singer...couldn't be any better!

video interessante e molto completo

Top man, made it so easy for me, got completely ripped from a local plumber, i'll do it myself from now on. Thank you for the video

Hi James, Do you know is there any seal lubricant needed for the waste pipe? If yes, How often dose the lubricant needs to be refreshed applied on? my toilet was leaking and yesterday they came to applied some glue on the pipe, but I’m not sure how often should the glue needs to be refreshed applied upon. Thank you!

Plumber of 30 years n never fitted wall hung haha ( until now) watched this for a rough guide and followed manufacturer's instructions. And it was straight forward . Every day's a school day . Thanks . Great video

Thank you for such an informative video. After replacing a new (wall toilet) I just realized that as soon as I placed my toilet, the toilet is loose and lean forward (can't handle the weight). My gf even felt with the toilet. I checked the studs... they are a bit wobbly but the privious toilet had no issue with them ( though it had no hiiden scews and it was bolted to the wall). at this point I am really giving up. After re installing it, I could nearly flush the right side with a wall but the left side is still has distance from the wall and is leaning forward ! Is it a problem with my measurement and fitting the screw ?

Can vaseline be used on the rubber seals ? I am not familiar with the brand “very liquid.”

Lets face it, 99% of plumbers would have stuck this to the wall with silicon and ran like hell. I speak as a joiner with 40 years of experience of chasing these jobs when the customer wants boxing in done,( actually its the basin on the pedestal that the plumbers stick with silicon, but it genuinely is 90 odd percent of them).

When these things go wrong, they’re a proper pain to fix.

Thank you so much for sharing the video to us.

I'm all thumbs so I really appreciated how clear you communicated what you were doing. Great video.

How far out can you fit these from the wall my waste comes out to the left and the centre of the waste sits 22cm from the wall

I’m not a plumber but I would advise against putting the toilet lid on and siliconing the toilet bowl around straight away. You’d likely want to use it for couple of hours to ensure the connection to the bowl isn’t letting any water through.

❤❤❤

If something goes wrong with some of the mechanisms in the loo, how do you access it if it's walled in? Have to say I like a hung toilet because you can get a mop underneath it. Can you have them where there's an external cistern like a normal loo?

“I just reinforced it”. Dude, how…

Wrong lub, will make rubber perish over time

awesome Video m8 😊

Ehau, louly whauly daouly duuu.

Nice Plumbing work Sir..

am l going to break the wall and install it inside the wall

A bit of advice: never improvise with the height of the toilet seat. Please, read the instruction first. As you can see, there is a mark near the top side of the frame. It's written "1 m" - just adjust the height of the frame to get this "1m mark" at the 1 m from the floor level. That's easy.

Thanks for this,I want to ask is it using light for the flush to work

Plumber and carpentry 🤣🤣🤣🤣🤣🤣

Very Nice Toilet

How to wall hung toilet if at the back we have plasterboard wall?Would I need to build timber frame fixed to ceiling and floor?

I love your channel and gave learnt so much but the adverts are killing me, literally 5-8 per video! 😢

Why not use a "gasket" between the toiler and the wall? It will help with squicky noises as the bolts loosens up

Is there was way to close the hollow space from the bottom? I feel it might become home to lizards, rats, snakes or insects in the long run.

Thank you for the excellent video showing the install of a wall hung toilet. There is a lot of work involved to install the tank unit correctly. Not complicated but many small jobs insuring the tank unit is level and secure and the bowl fits at the proper height. In my case my bathrooms were large enough so I installed one-piece toilets with toilet seat bidets. Much easier and in my opinion the one-piece toilets are much nicer in appearance than wall hung.

I have just had one of these toilets fitted, now it has blocked twice, how do you get back into the box to check the pipes. Checked the outdoor drains, clear, isn’t underground pipes as we had a toilet for four years before the new one fitted and no blocking. Please help me with knowledge.

Might as well just box it in to the ceiling

Great video. The things is a mix of metric /imperial also new homes framing is 16" center old ones 1800/1900 is 19-3/16 center and the pain in the but is plaster over lattice hard to locate studs. Anyway appreciate your effort to demo hanging the toilet

What size was the seal for the water inlet would it be 40mm or 50

What happens if the flush breaks down?

Good video very helpful , If you get a wall hung toilet , and you need to fix it in the future for example how do you get access to the plumbing ?

These types of videos are dangerous for customers like me. I watched it from beginning to end and some bits several times. Now I'm on the plumbers case making sure he's reading all the instructions and getting it right. He's gonnna hate me ... and you! 😆

How to convert an already floored toilet into a wall hung toilet? Detailed video?

thanks for the video. though aesthetically nice these are a pain to fix anything inside. ive made a leak test by placing a bit of paper towel inside the toilet and it instanlty got wet revealing there is a slight leak. what would be a common cause, something inside the wall?

You know the threaded screws into the frame that holds the pan in place should there be any play on those? They seem to move up and down as if the frame internal thread is too large, I’m currently fitting my bathroom and having a right nightmare with the pan having movement and I think it’s due to this 🤔.

nice....but go fix that if anything goes wrong

Never completely trust these not to fall off the wall