Easily adjust the collimation of your binoculars.  My recent zeiss purchase as an example.

Easily adjust the collimation of your binoculars. My recent zeiss purchase as an example.

2,433 Просмотров

Ссылки и html тэги не поддерживаются


Комментарии:

@coldspring22
@coldspring22 - 19.12.2024 22:55

Instead of guestimating collimation, you could have simply unscrewing/screwing the objective lens unit a bit by bit incrementally and check collimation. Once you have good collimation, then you know how much to move the ring and where before you actually move it

Ответить
@donewing2536
@donewing2536 - 18.12.2024 23:45

Excellent

Ответить
@Martyn0001
@Martyn0001 - 26.10.2024 14:47

Brill, thanks!

Ответить
@enzostefani4967
@enzostefani4967 - 10.10.2024 18:23

Thank you so much Mr Hopper for
Your video, so simple that even a layman like me was able to understand and put it into practice
Those teachings that allowed me to perfectly collimate an old Carl Zeiss Jena 8x30 Deltrintem and I add that I very much agree with your advice given at the end of the video on how to deal with the small problems that arise when things break. I have been thinking like you for years and applying your theories. Thanks again and sorry for my bad English.

Ответить
@williamgardner2739
@williamgardner2739 - 12.09.2024 01:13

How do you know which lens is the lens to adjust.

Ответить
@timothyandrewausten
@timothyandrewausten - 07.08.2024 19:41

Grat video. I had to fix my dad's binoculars, because I dropped them on a rock--only from a height of just inches, but it was enough to jar them out of alignment. I opened them up and didn't find any way to adjust them. I decided to take a risk and tap them on a table in the opposite direction of the original bump. After a few of these adjustments, it came back into colummation. 😎

Ответить
@BTSflyer
@BTSflyer - 29.05.2024 00:18

How do you know to adjust the lens and not the prisms for collimation?

Ответить
@karlaugenstein275
@karlaugenstein275 - 29.02.2024 23:15

I have a pair of Zeiss 10X50 Jenoptems that were also out of collimation. After watching this video multiple times I purchased an adjustable spanner wrench and had a friend with a machine shop turn down the nubs on the wrench to thin spindles. This made a perfect collimating tool and I was able to collimate the bino's in about 10 minutes. Thank you Mr. Hopper.

Ответить
@JessicaRHopper
@JessicaRHopper - 24.11.2023 19:50

Innovative way to solve a problem and bring something back to life so someone can use them again. Love it!

Ответить